So who wants to be a winner..
So here’s your chance to win Hendrik Varju’s “Jointer and Planer Secrets”. So here’s what we are going to do, all of you that comment on this post will have a chance to win. I will take comments until Wednesday night, then I will print them out and put them into my hat and pull one out. And bingo that will be our winner. So you have until Wednesday night everyone.
April 20th, 2008 at 6:24 pm
I wouldn’t mind a chance at that. I’m glad to hear you had a great weekend. Got to recharge the batteries every so often.
Don
April 20th, 2008 at 6:25 pm
Kaleo,
Keep up the great work!
Jaime
April 20th, 2008 at 9:00 pm
OK Kaleo,
Sign me up! I’m glad I caught this, work is gonna be taking all my time between now and the end of next weekend. It should be really cool. Every year we host an Alternative Energy Expo and Electrathon car race. With the “green” attitude that has exploded this year, it should be an awesome turn out!
April 21st, 2008 at 2:51 am
Great show! So far I’ve been lucky enough not to have done any significant work to my jointer, but the blades seem to be getting a little dull and may need sharpening.
Mike
April 21st, 2008 at 4:50 am
I want to be a winner!
Markus
April 21st, 2008 at 8:54 am
I enjoy your podcasts.
April 21st, 2008 at 9:38 am
Kaleo,
Great job! Keep them coming.
Terry
April 21st, 2008 at 9:39 am
Kaleo,
I was going to write you before about the table saw router combo…now would be as good a time as any.
I have the combination, with the Incra fence setup, and I love it. But I certainly would have them set up separately if I had the space, and I did woodwork as a professional…time isn’t money for me…at least not with woodworking. But I did get the Woodpecker router lift for my table, with a Porter Cable router, and can’t say enough good things about it.
Also…I find that I am unable to start my workday without checking to see if you, Mark, Matt, or LumberJocks have anything new on your sites…I really need to get out more…
April 21st, 2008 at 10:20 am
Cool Beans, I could always use a new book. keep up the good work.
Joey
April 21st, 2008 at 10:23 am
did I say book I meant video duh to much sawdust in my brain makes me insane. lol later Joey
April 21st, 2008 at 10:29 am
I’d like a shot at that video. Thanks for the opportunity.
April 21st, 2008 at 1:49 pm
I never win anything…..lol
Thanks!!!
April 21st, 2008 at 1:57 pm
Kaleo,
I look forward to seeing more of your creations once your shop it complete. The planer and jointer tips are great! My jointer is just waiting for me to tune it up again, and this info gives me a good head start. But I think my biggest problem is vibration coming from somewhere…. more investigation needed.
Thanks for the site, keep up the good work.
Ben
April 21st, 2008 at 2:01 pm
well; good luck on the full time job ,try to move as sooon as possible. more time 4 every thing wife ,kids & wood. dan g.
April 21st, 2008 at 2:26 pm
I heard a review of this video on Matt’s Basement Workshop a while back and it sounds really good. I want! I want!
April 21st, 2008 at 4:14 pm
I don’t have a jointer yet but I still need to learn as much as I can. Sounds like this video would be a great way to do just that.
April 21st, 2008 at 4:31 pm
Kaleo,
Enjoying watching the process you are going through, keep up the good work and look forward to seeing a finished project roll out of the shop. I’d love to check out the vid as well.
Thanks
Matt
April 21st, 2008 at 5:28 pm
FWIW, I was able to dl that huge video from iTunes just fine. Enjoying you setting up the shop. Hope you’re able to get going asap. And finally, here’s my request for the drawing. Would love to check out that video. :)
Thanks,
PaulD
April 21st, 2008 at 5:53 pm
sign me up.
square carbide spiral cutterheads rock!
April 21st, 2008 at 6:42 pm
Hey Kaleo, when a manufacturer sends you that new jointer, I can drive down from Oakton, VA and pick up your old one so you can make room for the new one. :-)
Jim
April 21st, 2008 at 9:28 pm
I would just like to say that I really like the videos that you have been doing. I can’t wait to see you work on some projects. Keep it up!
Thanks,
David
April 22nd, 2008 at 5:28 am
Great podcast. Keep up the great work.
April 22nd, 2008 at 6:59 am
Ooooooo! Video good. Maybe I will actually stop staring the screen and build something.
April 22nd, 2008 at 7:04 am
Kaleo,
Nice work! I just started listening/watching - caught up on TWW podcasts and needed my woodworking fix! I’m glad I decided to check you out. Thanks!
April 22nd, 2008 at 11:49 am
Thanks for all you do.
April 22nd, 2008 at 12:54 pm
You’re a big winner. I’m gonna ask you a simple question and I want you to listen to me: who’s the big winner here tonight at the casino? Huh? Kaleo, that’s who. Kaleo’s the big winner. Kaleo wins.
April 22nd, 2008 at 1:57 pm
Good work! I am enjoying the videos.
Thanks,
David
April 22nd, 2008 at 1:58 pm
Good work! I really like the videos!
Thanks.
David
April 22nd, 2008 at 7:44 pm
Kaleo,
Enjoy the programs. Maybe sometime tou could comment on various ways to taper legs, including on the jointer.
April 23rd, 2008 at 5:06 am
A chance at free stuff. Count me in!
April 23rd, 2008 at 8:33 am
I’ll be using your tips to tune up my jointer this weekend. Thanks.
April 23rd, 2008 at 8:54 am
Kaleo, I am excited for you to be online. I have enjoyed the podcast and videos. I am new to all this myself(5 months) and Ive just finished a queen anne side chair. I am wanting to try some design also. Keep up the good work and keep it coming.
April 23rd, 2008 at 9:48 am
I was impressed with the clean shop!! Anyway sign me up!!
April 23rd, 2008 at 4:48 pm
ok, i’m leaving my comment. i hope i win;)
April 23rd, 2008 at 6:27 pm
Kaleo, great job with the podcasts………keep them coming!
Sign me up for the drawing.
Thanks!
April 23rd, 2008 at 7:17 pm
Hi Kaleo,
Please sign me up for the drawing.
Thanks,
Luis
April 24th, 2008 at 2:55 pm
Hey Kaleo!